Logging to file "Update_040-041-001.log"
sim> sh rq
RQ, address=2013F468-2013F46B*, no vector, 4 units
  RQ0, 204MB, not attached, write enabled, RA60
  RQ1, 204MB, attached to VMS040.RA6, write enabled, RA60
  RQ2, 204MB, not attached, write enabled, RA60
  RQ3, 204MB, not attached, write enabled, RA60
sim> b rq1
Loading boot code from vmb.exe

  
   VAX/VMS Version V4.0 15-SEP-1984 22:29
  

PLEASE ENTER DATE AND TIME (DD-MMM-YYYY  HH:MM)  22-JAN-1985 9:48

%%%%%%%%%%%  OPCOM  22-JAN-1985 09:48:24.46  %%%%%%%%%%%
Logfile has been initialized by operator _OPA0:
Logfile is SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;2
%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
  SYSTEM       job terminated at 22-JAN-1985 09:48:24.63


Username: SYSTEM

Password: 
        Welcome to VAX/VMS version V4.0
    Last interactive login on Monday,  1-OCT-1984 09:57

 $ sh dev d

Device                  Device           Error    Volume         Free  Trans Mnt
 Name                   Status           Count     Label        Blocks Count Cnt
DBA1:                   Online               0
DBA3:                   Online               0
DBA4:                   Online               0
DBA5:                   Online               0
DBA6:                   Online               0
DBA7:                   Online               0
DJA1:                   Mounted              0  VAXVMSRL4       289150    54   1
DLA0:                   Online               0
DLA1:                   Online               0
DLA2:                   Online               0
DLA3:                   Online               0
DMA0:                   Online               0
DMA1:                   Online               0
DMA2:                   Online               0
DMA3:                   Online               0
DMA4:                   Online               0
DMA5:                   Online               0
DMA6:                   Online               0
DMA7:                   Online               0
DRA0:                   Online               0
DRA2:                   Online               0
DUA0:                   Online               0
DUA2:                   Online               0
DUA3:                   Online               0
DYA0:                   Online               0
DYA1:                   Online               0

 $ 
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> sh rl
RL, address=2013F900-2013F909, vector=70, 4 units
  RL0, 5242KW, not attached, write enabled, autosize
  RL1, 2621KW, not attached, write enabled, autosize
  RL2, 2621KW, not attached, write enabled, autosize
  RL3, 2621KW, not attached, write enabled, autosize
sim> att rl0 BE-EF47A-BE.T58
sim> c

 $ mou/over=id dla0:

%MOUNT-I-MOUNTED, VMS04101     mounted on _DLA0:

 $ dir/siz dla0:<000000>

Directory DLA0:<000000>

000000.DIR;1              1
BACKUP.SYS;1              0
BADBLK.SYS;1              0
BADLOG.SYS;1              0
BITMAP.SYS;1              2
CONTIN.SYS;1              0
CORIMG.SYS;1              0
INDEXF.SYS;1             21
VMS041.A;1         device is not mounted
VOLSET.SYS;1              0

Total of 10 files, 24 blocks.

 $ dism dla0:

 $ @sys$update:vmsinstal vms041


        VAX/VMS Software Product Installation Procedure V4.0


It is 22-JAN-1985 at 09:51.
Enter a question mark (?) at any time for help.

* Are you satisfied with the backup of your system disk [YES]? 
* Where will the distribution volumes be mounted: dla0:

Please mount the first volume of the set on DLA0:.
* Are you ready? yes

%MOUNT-I-MOUNTED, VMS04101     mounted on _DLA0:

The following products will be processed:

  VMS V4.1


        Beginning installation of VMS V4.1 at 09:51

%VMSINSTAL-I-RESTORE, Restoring product saveset A...
%BACKUP-I-READYREAD, mount volume 2 on _DLA0: for reading
Enter "YES" when ready: 
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rl0 BE-EF48A-BE.T58
sim> c
yes
%BACKUP-I-READYREAD, mount volume 3 on _DLA0: for reading
Enter "YES" when ready: 
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rl0 BE-EF49A-BE.T58
sim> c
yes


This is the VMS/MicroVMS V4.1 maintenance update.  It is to be
installed on a V4.0 system.


        1)  Apply all fixes to the system
        2)  Create a file with the descriptions of all fixes
        3)  Both of the above

* What would you like to do [3]: 

%VMS-I-FIXDESC, The fixes are described in SYS$UPDATE:VMS041.TXT
* Do you want to purge files replaced by this installation [YES]? 

%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-I-RESUME, resuming operation on volume 4
%BACKUP-I-READYREAD, mount volume 4 on _DLA0: for reading
Enter "YES" when ready: 
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rl0 BE-EF50A-BE.T58
sim> c
yes

%BACKUP-I-STARTVERIFY, starting verification pass

 1) ANALYZOBJ (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]ANALYZOBJ.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]ANALYZOBJ.EXE;1

 2) ANALYZRMS (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]ANALYZRMS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]ANALYZRMS.EXE;1

 3) AUTHORIZE (new image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]AUTHORIZE.EXE;3

 4) BACKUP (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]BACKUP.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]BACKUP.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]BACKUP.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]BACKUP.EXE;1

 5) BADBLOCK (new image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]BADBLOCK.EXE;3

 6) BASRTL (miscellaneous fix)

 7) COBRTL (miscellaneous fix)

 8) COBRTL (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]COBRTL.EXE;1

 9) CONVSHR (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]CONVSHR.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]CONVSHR.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]CONVSHR.EXE;1

10) COPY (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]COPY.EXE;1

11) CREATE (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]CREATE.EXE;1

12) CSP (new image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]CSP.EXE;15

13) DCL (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]DCL.EXE;1

14) DCLTABLES (miscellaneous fix)

15) DEBUG (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]DEBUG.EXE;1

16) DEBUGHLP (miscellaneous fix)

17) DIRECTORY (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]DIRECTORY.EXE;1

18) DUDRIVER (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]DUDRIVER.EXE;1

19) EDTSHR (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]EDTSHR.EXE;1

20) ERF (new image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]ERF.EXE;3

21) ERFPROC1 (new image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]ERFPROC1.EXE;5

22) F11BXQP (new image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]F11BXQP.EXE;5
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]F11BXQP.EXE;5
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]F11BXQP.EXE;5

23) FAL (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]FAL.EXE;1

24) FDLSHR (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]FDLSHR.EXE;1

25) FILMNTMSG (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]FILMNTMSG.EXE;1

26) FORRTL (miscellaneous fix)

27) FORRTL (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]FORRTL.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]FORRTL.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]FORRTL.EXE;1

28) JOBCTL (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]JOBCTL.EXE;1

29) LBRSHR (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]LBRSHR.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]LBRSHR.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]LBRSHR.EXE;1

30) LIBRTL (miscellaneous fix)

31) LIBRTL (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]LIBRTL.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]LIBRTL.EXE;1

32) LINK (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]LINK.EXE;1

33) LTDRIVER (new image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]LTDRIVER.EXE;4

34) MACRO32 (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]MACRO32.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]MACRO32.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]MACRO32.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]MACRO32.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]MACRO32.EXE;1

35) MAIL (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]MAIL.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]MAIL.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]MAIL.EXE;1

36) MSCP (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]MSCP.EXE;1

37) MTAAACP (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]MTAAACP.EXE;1

38) NCP (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]NCP.EXE;1

39) NETACP (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]NETACP.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]NETACP.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]NETACP.EXE;1

40) NETCONFIG (edit text file)

41) NODRIVER (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]NODRIVER.EXE;1

42) OPCOM (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]OPCOM.EXE;1

43) PASRTL (miscellaneous fix)

44) PASRTL (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]PASRTL.EXE;1

45) PUDRIVER (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]PUDRIVER.EXE;1

46) RMS (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]RMS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]RMS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]RMS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]RMS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]RMS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]RMS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]RMS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]RMS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]RMS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]RMS.EXE;1

47) RTPAD (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]RTPAD.EXE;1

48) SDA (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SDA.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SDA.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SDA.EXE;1

49) SDLNPARSE (new image)
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SDLNPARSE.EXE;2

50) SECURESHR (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SECURESHR.EXE;1

51) SET (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SET.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SET.EXE;1

52) SETP0 (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SETP0.EXE;1

53) SHOW (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SHOW.EXE;1

54) SMBSRVSHR (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SMBSRVSHR.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SMBSRVSHR.EXE;1

55) SMGRTL (miscellaneous fix)

56) SMGSHR (new image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SMGSHR.EXE;3

57) STABACKUP (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]STABACKUP.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]STABACKUP.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]STABACKUP.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]STABACKUP.EXE;1

58) SYS (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SYS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SYS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SYS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SYS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SYS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SYS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SYS.EXE;1

59) SYSGEN (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SYSGEN.EXE;1

60) SYSLOA730 (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SYSLOA730.EXE;1

61) SYSLOA750 (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SYSLOA750.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SYSLOA750.EXE;1

62) SYSLOA780 (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]SYSLOA780.EXE;1

63) TSDRIVER (new image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]TSDRIVER.EXE;3
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]TSDRIVER.EXE;3

64) TTDRIVER (new image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]TTDRIVER.EXE;3

65) TUDRIVER (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]TUDRIVER.EXE;1

66) UETCLIG00 (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]UETCLIG00.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]UETCLIG00.EXE;1

67) VMSINSTAL (edit text file)

68) VMSKITBLD (new file)

69) XDDRIVER (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]XDDRIVER.EXE;1

70) XGDRIVER (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]XGDRIVER.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]XGDRIVER.EXE;1

71) YCDRIVER (new image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]YCDRIVER.EXE;3
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMS041]YCDRIVER.EXE;3

%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...

        Installation of VMS V4.1 completed at 09:53

%VMSINSTAL-I-REBOOT, This product requires that the system be rebooted.


        SHUTDOWN -- Perform an Orderly System Shutdown


%SHUTDOWN-I-BOOTCHECK, Performing reboot consistency check...
%SHUTDOWN-I-CHECKOK, Basic reboot consistency check completed

%SHUTDOWN-I-OPERATOR, This terminal is now an operator's console.
%%%%%%%%%%%  OPCOM  22-JAN-1985 09:53:23.17  %%%%%%%%%%%
Operator status for operator _OPA0:
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10, OPER11,
OPER12
%SHUTDOWN-I-DISLOGINS, Interactive logins will now be disabled.
%SET-I-INTSET, login interactive limit = 0, current interactive value = 1
%SHUTDOWN-I-STOPQUEMAN, The queue manager will now be stopped.

SHUTDOWN message from user SYSTEM at _OPA0:   09:53:23
The system will shut down in 0 minutes; back up soon.  Please log off.
Reboot after VMS V4.1 installation.

1 terminal has been notified.

%SHUTDOWN-I-SITESHUT, The site-specific shutdown procedure will now be invoked.
%SHUTDOWN-I-STOPUSER, All user processes will now be stopped.
%SHUTDOWN-I-REMOVE, All installed images will now be removed.
%SHUTDOWN-I-DISMOUNT, All volumes will now be dismounted.
%%%%%%%%%%%  OPCOM  22-JAN-1985 09:53:23.51  %%%%%%%%%%%
Message from user SYSTEM
_OPA0:, The system shutdown was requested by the operator.
%%%%%%%%%%%  OPCOM  22-JAN-1985 09:53:23.53  %%%%%%%%%%%
Logfile was closed by operator _OPA0:
Logfile was SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;2
%%%%%%%%%%%  OPCOM  22-JAN-1985 09:53:23.54  %%%%%%%%%%%
Operator _OPA0: has been disabled, username SYSTEM

  
	SYSTEM SHUTDOWN COMPLETE - USE CONSOLE TO HALT SYSTEM
  
Infinite loop, PC: 80008D7E (BRB 80008D7E)
sim> b rq1
Loading boot code from vmb.exe

  
   VAX/VMS Version V4.1 05-JAN-1985 22:29
  

%%%%%%%%%%%  OPCOM  22-JAN-1985 09:54:29.86  %%%%%%%%%%%
Logfile has been initialized by operator _OPA0:
Logfile is SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;3
%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
  SYSTEM       job terminated at 22-JAN-1985 09:54:30.02


Username: SYSTEM

Password: 
        Welcome to VAX/VMS version V4.1
    Last interactive login on Tuesday, 22-JAN-1985 09:48

 $ sh sys

VAX/VMS V4.1  on node  22-JAN-1985 09:54:54.28   Uptime    0 00:00:35
  Pid    Process Name    State  Pri      I/O       CPU       Page flts Ph.Mem
00000080 NULL            COM      0        0   0 00:00:34.19         0      0   
00000081 SWAPPER         HIB     16        0   0 00:00:00.02         0      0   
00000084 ERRFMT          HIB      9       2117-NOV-1858 00:0        67     88   
00000085 OPCOM           LEF      9       15   0 00:00:00.01       132    149   
00000086 JOB_CONTROL     HIB      8       14   0 00:00:00.01        81    190   
00000087 SYSTEM          CUR      4       39   0 00:00:00.02       358    152   

 $ sh mem

              System Memory Resources on 22-JAN-1985 09:54:59.55

Physical Memory Usage (pages):     Total        Free      In Use    Modified
  Main Memory (8.00Mb)             16384       13514        2800          70

Slot Usage (slots):                Total        Free    Resident     Swapped
  Process Entry Slots                 70          64           6           0
  Balance Set Slots                   51          47           4           0

Fixed-Size Pool Areas (packets):   Total        Free      In Use        Size
  Small Packet (SRP) List            743         642         101          96
  I/O Request Packet (IRP) List      520         449          71         208
  Large Packet (LRP) List              3           1           2         656

Dynamic Memory Usage (bytes):      Total        Free      In Use     Largest
  Nonpaged Dynamic Memory         239616      119536      120080      118560
  Paged Dynamic Memory            219648       56576      163072       55248

Paging File Usage (pages):                      Free      In Use       Total
  DISK$VAXVMSRL4:[SYS0.SYSEXE]SWAPFILE.SYS     22328         672       23000
  DISK$VAXVMSRL4:[SYS0.SYSEXE]PAGEFILE.SYS     38768           0       38768

Of the physical pages in use, 2172 pages are permanently allocated to VMS.

 $ sh dev d

Device                  Device           Error    Volume         Free  Trans Mnt
 Name                   Status           Count     Label        Blocks Count Cnt
DBA1:                   Online               0
DBA3:                   Online               0
DBA4:                   Online               0
DBA5:                   Online               0
DBA6:                   Online               0
DBA7:                   Online               0
DJA1:                   Mounted              0  VAXVMSRL4       284329    54   1
DLA0:                   Online               0
DLA1:                   Online               0
DLA2:                   Online               0
DLA3:                   Online               0
DMA0:                   Online               0
DMA1:                   Online               0
DMA2:                   Online               0
DMA3:                   Online               0
DMA4:                   Online               0
DMA5:                   Online               0
DMA6:                   Online               0
DMA7:                   Online               0
DRA0:                   Online               0
DRA2:                   Online               0
DUA0:                   Online               0
DUA2:                   Online               0
DUA3:                   Online               0
DYA0:                   Online               0
DYA1:                   Online               0

 $ sh dev

Device                  Device           Error    Volume         Free  Trans Mnt
 Name                   Status           Count     Label        Blocks Count Cnt
DBA1:                   Online               0
DBA3:                   Online               0
DBA4:                   Online               0
DBA5:                   Online               0
DBA6:                   Online               0
DBA7:                   Online               0
DJA1:                   Mounted              0  VAXVMSRL4       284329    54   1
DLA0:                   Online               0
DLA1:                   Online               0
DLA2:                   Online               0
DLA3:                   Online               0
DMA0:                   Online               0
DMA1:                   Online               0
DMA2:                   Online               0
DMA3:                   Online               0
DMA4:                   Online               0
DMA5:                   Online               0
DMA6:                   Online               0
DMA7:                   Online               0
DRA0:                   Online               0
DRA2:                   Online               0
DUA0:                   Online               0
DUA2:                   Online               0
DUA3:                   Online               0
DYA0:                   Online               0
DYA1:                   Online               0

Device                  Device           Error    Volume         Free  Trans Mnt
 Name                   Status           Count     Label        Blocks Count Cnt
MSA0:                   Online               0

Device                  Device           Error
 Name                   Status           Count
OPA0:                   Online               0

Device                  Device           Error
 Name                   Status           Count
LPA0:                   Online               0

Device                  Device           Error
 Name                   Status           Count
PUA0:                   Online               1

 $ type sys$update:*.txt

 
SYS$SYSROOT:[SYSUPD]VMS041.TXT;1
 
 1) ANALYZOBJ (patch image)

    ! ANALYZOBJ.EXE
    !
    !   ECO02   MGN0006         29-OCT-1984
    !           MODULE: EXEINPUT
    !           This patch resolves SPR #CS00321, so that ANALYZE/IMAGE
    !           can analyze fixup sections larger than 127.
    !
    !   ECO01   MGN0005         29-OCT-1984
    !           MODULE: EXESTUFF
    !           ANALYZE/IMAGE now returns all images with V4 image header
    !           format so we do not have to distinguish between versions
    !           for analysis.


 2) ANALYZRMS (patch image)

    ! ANALYZRMS.EXE
    !
    !   ECO02   DGB0088         22-OCT-1984
    !           MODULE: RMSINPUT
    !           Use the extended UIC format in analyze/rms/fdl.
    !
    !   ECO01   DGB0085         27-SEP-1984
    !           MODULE: RMS2IDX
    !           Unwind the stack (i.e. quit trying to analyze the file)
    !           if the area descriptor of an indexed file contains an
    !           illegal bucket size.  
    !


 3) AUTHORIZE (new image)

    ! AUTHORIZE.EXE
    !
    !   ECO01   JRL0038         18-Oct-1984
    !           MODULE: UAFPARSE
    !           Because of a lost update packet in the source manager,
    !           some security auditing features were left out of V4.0.
    !           They are restored here.


 4) BACKUP (patch image)

    ! BACKUP.EXE
    !
    !   ECO04   LY004             4-OCT-1984 15:43
    !           MODULE  : LIST, MAIN
    !           ROUTINE : FIN_LIST, MAIN
    !           Reset file and block counter after listing each save set
    !           Add "End of BACKUP operation" message.
    !           Print "End of..." message after a save or copy operation
    !           not just after listing an already existing journal or
    !           save set.
    !           ************** CAUTION **************************
    !           The unused byte named COM_PADDING in the common area
    !           is being used in this patch for a flag.  It is at address
    !           000003C8 .
    !           ************** CAUTION **************************
    !
    !   ECO03   LY003            2-OCT-1984 12:57
    !           MODULE  : LIST, COMMAND
    !           ROUTINE : INIT_LIST, CHECK
    !           If listing a copy operation then say
    !           "Listing of BACKUP operation" instead of
    !           "Listing of save set"
    !
    !   ECO02   LY002            1-OCT-1984 10:36
    !           MODULE:  STAACP
    !           ROUTINE: READY_DISK
    !           Always issue an IO$_AVAILABLE before requesting a new
    !           disk be mounted.  This avoids the endless loop on RX50's
    !           if an error is detected on a disk.
    !
    !   ECO01   LY0001           1-OCT-1984 09:05
    !           MODULE: SAVE
    !           Update version number to V4.1
    !


 5) BADBLOCK (new image)

    ! BADBLOCK.EXE
    !
    !   ECO01   HH0059          01-OCT-1984
    !           MODULE: SCANFILE
    !           Enhance BADBLOCK to handle a larger class of I/O errors.
    !           Also, rework completion routines.
    !           


 6) BASRTL (miscellaneous fix)

    !
    !  BASRTL.EXE
    !
    !  KC2005   15-Sep-1984
    !  Module:  BAS$VAL
    !  Correct a problem in VAL of double-precision numbers.
    !


 7) COBRTL (miscellaneous fix)

    !  COBRTL.EXE
    !
    !


 8) COBRTL (patch image)

    ! COBRTL.EXE
    !
    !   ECO01   TS      02-Nov-1984
    !           Module:  COB$DISPLAY
    !           In COMMON_SCREEN, create a
    !           larger output buffer to prevent
    !           ACTVIO when buffer overflows.
    !


 9) CONVSHR (patch image)

    ! CONVSHR.EXE
    !
    !   ECO01   JWT0198                          7-Nov-1984
    !           MODULE: CONV$FSTIO
    !           Add to area total allocation ONLY on extends. 
    !           The previous logic would add an initial allocation
    !           twice.
    !
    !   ECO02   JWT0199                          7-Nov-1984
    !           MODULE: CONV$MAIN
    !           Fix bogus FORTRAN carriage control character for
    !           conversion.
    !   ECO03   JWT0200                         26-Nov-1984
    !           MODULE: CONV$FSTIO
    !           Fix bad vbn-size formula.  CONVERT made 4-byte vbn
    !           pointers when vbn was greater than 00100000.
    !


10) COPY (patch image)

    ! COPY.EXE
    !
    !   ECO02   TSK0016         Tamar Krichevsky           8-Nov-1984
    !           Make sure directory files are checked against the command line
    !           criteria.  Since directory files are created in COPY$COPY and 
    !           all other output files are created in COPY$OPN_OUTFIL, 
    !           COPY$CHECK_FILE_FOR_MATCH must be called from COPY$COPY.
    !
    !   ECO01   MGN0003         11-Sep-1984
    !           MODULE: COPYMAIN
    !           This fixes an access violation when copying files from the
    !           CI port.  The routine COPY$INOPN_ERR was taking the NAM
    !           block from the RAB instead of using the FAB.


11) CREATE (patch image)

    ! CREATE.EXE
    !
    !   ECO001  SHZ                     21-Sep-1984
    !           MODULE:  CREATE_DIR
    !           Issue the $PARSE with SYNCHK bit set in $NAM for CREATE/DIR
    !           so directory gets created in correct spot when using
    !           searchlists.
    !


12) CSP (new image)

    ! CSP.EXE
    !
    !   ECO01   DYC0001         26-NOV-1984
    !           MODULE: CSP.B32, CSPQUORUM.MAR
    !           Added check for different versions of VMS in cluster and
    !           output message to opcom.  Also added check for revectored
    !           bad block in CSPQUORUM to simply rewrite the new block
    !           with quorum file template.


13) DCL (patch image)

    ! DCL.EXE
    !
    !   ECO001  HWS                     18-Sep-1984
    !           MODULE: STATUS
    !           Remove special handling of forced exit and exceeded cpu
    !           errors.
    !
    !
    !
    ! Patch STATUS
    !


14) DCLTABLES (miscellaneous fix)

    ! DCLTABLES
    !
    !   ECO01   HWS0111         08-NOV-9184
    !           Update the command definition for DELETE.
    !
    !   ECO02   HWS0112         08-NOV-1984
    !           Update the command definition for SHOW.
    !
    !   ECO03   HWS0113         08-Nov-1984
    !           Update the command definition for DCLINT.


15) DEBUG (patch image)

    ! DEBUG.EXE


16) DEBUGHLP (miscellaneous fix)

    !
    !  DEBUG.EXE
    !
    !


17) DIRECTORY (patch image)

    ! DIRECTORY.EXE
    !
    !   ECO01   LMP0311         5-Nov-1984
    !           MODULE: DISPLAY
    !           This ECO is one part of a two part fix to correct a bug in
    !           displaying information about magtape files (during a full
    !           display).  This part clears the high word of the file
    !           characteristics, because the magtape ACP returns it using
    !           the ODS-1 (16-bit) format; without clearing the high word.


18) DUDRIVER (patch image)

    ! DUDRIVER.EXE
    !
    !   ECO01   ROW0418          6-NOV-1984
    !           MODULE: DUDRIVER
    !           Correct MSCP$K_MD_SPNDW (spin down modifier) value so that 
    !           DISMOUNT /UNLOAD does.


19) EDTSHR (patch image)

    ! EDTSHR.EXE                
    !
    !   ECO01   KEB0001         19-DEC-1984
    !           MODULE: LSHOW
    !           Patch version number so that it is consistent with other
    !           operating systems that ship EDT V3.
    !           


20) ERF (new image)

    ! ERF.EXE
    !
    !   ECO01   SAR0293         2-Nov-1984
    !           MODULE: ERF
    !           Made /EXCLUDE=UNKNOWN work.
    !           


21) ERFPROC1 (new image)

    ! ERFPROC1.EXE
    !
    !   ECO01   SAR0292         2-Nov-1984
    !           MODULE: ERFPROC1
    !           Added TA78 device dependent support.
    !           


22) F11BXQP (new image)

    ! F11BXQP.EXE
    !
    !   ECO01   ACG0468         18-Sep-1984
    !           MODULES: QUOTAUTIL, CLENUP
    !           Count a write access to the quota file when quotas are
    !           enabled, to prevent the quota file from being deleted
    !           when quotas are enabled anywhere in a cluster.
    !
    !   ECO02   ACG0470         27-Sep-1984
    !           MODULE: RWATTR
    !           Correct the file access checks related to ACL modification.
    !
    !   ECO03   CDS0001         10-Nov-1984
    !           MODULES: DELBAD, TRUNC
    !           Fix bugs affecting bad block handling.  Make multi-header
    !           badblk.sys files work correctly.  Also update revision
    !           date on badblk.sys when bad blocks are deallocated to it.
    !
    !           CDS0002         10-Nov-1984
    !           MODULE: DEACCS
    !           Fix bug related to deferred truncation in a cluster.
    !           One symptom was the failure of log files to be
    !           truncated to end of file if it was being read on
    !           another node when the log file was closed.
    !
    !           CDS0003         10-Nov-1984
    !           MODULE: RDBLOK
    !           Add ambiguity resolution logic.  This fixes race
    !           conditions where an extension header is simultaneously
    !           being requested under different serialization locks.
    !
    !           CDS0004         14-Nov-1984
    !           MODULES: RDBLOK, RWVB, ACCESS, MAKACC
    !           Correctly invalidate file system cache in non-cluster
    !           and directory file situations.
    !
    !           CDS0005         15-Nov-1984
    !           MODULE: CLENUP
    !           Fix problem where delete of multi-header file returned
    !           spurious no such file error even though it succeeded.
    !
    !           CDS0006         15-Nov-1984
    !           MODULE: EXTHDR
    !           Correctly set reference count when extension fcb is
    !           created during file extension.  This caused spurious
    !           no such file error trying to access those headers.
    !
    !           CDS0007         15-Nov-1984
    !           MODULES: ACCESS, CHARGEQ, CREHDR, QUOTAUTIL, SMALOC
    !           Expand test for clusterness so that extent and fid
    !           caching are correctly enabled in certain non-cluster
    !           environments (microvax, for example).
    !           Also fix sense of test which was not doing a cluster
    !           wide flush of file id caches when the index file
    !           is extended.
    !
    !           CDS0008          2-Jan-1985
    !           MODULES: RDBLOK
    !           Perform buffer search again after writing buffer due
    !           to minimal cache conditions.
    !
    !           CDS0009         2-Jan-1985
    !           MODULE: CREATE
    !           Fix bug which caused diskquota leakage when creating
    !           file with a different uic as owner.


23) FAL (patch image)

    ! FAL.EXE
    !
    !   ECO 01  JEJ0057         18-Oct-1984
    !   MODULE: FALACTION
    !   Return the resultant file name whether or not an error is
    !   encountered during the $SEARCH operation.
    !


24) FDLSHR (patch image)

    ! FDLSHR.EXE
    !
    !   ECO01   JWT0197                          7-Nov-1984
    !           MODULE: FDLGEN
    !           Change the order of the FDL primaries to avoid
    !           an ambiguity in the language.
    !


25) FILMNTMSG (patch image)

    ! FILMNTMSG.EXE
    !
    !   ECO01   DGB0089         22-OCT-1984
    !           MODULE: Patch for ANALYZRMS.
    !           Fix analyze/rms to use the new FAO directive which
    !           allows the extended uic's which are new in V4.
    !


26) FORRTL (miscellaneous fix)

    !  STARLET.OLB
    !
    !           Add object modules to STARLET.OLB corresponding to patches
    !           made to FORRTL.EXE.  
    !
    !           SBL     2-Nov-1984
    !           Modules: FOR$BACKSPACE (1-011)
    !


27) FORRTL (patch image)

    ! FORRTL.EXE
    !
    !   ECO01   SBL             27-Sep-1984
    !           Module: FOR$BACKSPACE (1-011)
    !           When doing BACKSPACE of a SEGMENTED file,
    !           store the RFAs of the last physical record
    !           in each logical record rather than the first.
    !           This fixes the bug where BACKSPACE on segmented
    !           files of very long (>2044 bytes) records would
    !           misposition the file.
    !
    !
    !   ECO02   MDL             15-Nov-1984
    !           Module: FOR$IO_ELEM (2-048)
    !           Zero out the record size field in the RAB when a zero-length
    !           element is transmitted and the lower levels of abstraction
    !           are skipped.
    !
    !   ECO03   MDL             15-Nov-1984
    !           Module: FOR$$OPEN_DEFLT (1-099)
    !           Correct the check for invalid key position, size or datatype
    !           when opening existing indexed files.
    !


28) JOBCTL (patch image)

    ! JOBCTL.EXE
    !
    !   ECO01   JAK0001         20-SEP-1984
    !           MODULE: EXECUTOR
    !           Allow a process 5 seconds to be rundown before reissuing the
    !           forced exit call in the next higher access mode.


29) LBRSHR (patch image)

    ! LBRSHR.EXE
    !
    !   ECO 3   GJA0103                 09-Nov-1984 
    !           MODULES: LBR_GETHELP & LBR_OUTPUTHELP
    !           - Change the prompt string from two pairs of CR/LF to one 
    !           to allow line editing to work. 
    !           - Add some additional blank line output calls to try to 
    !           maintain a similar appearance to the two pair case. 
    !
    !   ECO 2   GJA0102                 09-Nov-1984 
    !           MODULE: LBR_GETHELP 
    !           - Move the code segment in LBR$Get_help which checks for 
    !           maximum key length to after the check for the key's existence.
    !
    !   ECO 1   GJA0101                 09-Nov-1984 
    !           MODULE: LBR_INDEX 
    !           - Initialize the class and dtype fields in the (stack local) 
    !           descriptor passed back to the user routine in LBR$Get_index.  
    !           


30) LIBRTL (miscellaneous fix)

    !
    !  LIBRTL.EXE
    !
    !  Provide new .OBJ for OTS$CVTLT, to place in STARLET.
    !


31) LIBRTL (patch image)

    ! LIBRTL.EXE
    !
    !   ECO02   LMP0313         5-Nov-1984
    !           MODULE: LIB$CREATE_DIR
    !           Insure that on a particular error patch, the error status is
    !           returned, not the address of the local storage cell.
    !
    !   ECO01   MDL             30-Oct-1984
    !           Module: OTS$CVTLT
    !           In OTS$CVT_L_TI, Prevent a plus sign from appearing 
    !           in an otherwise blank field.
    !


32) LINK (patch image)

    ! LINK.EXE
    !   
    !   ECO01   ADE0001         05-Nov-1984
    !           MODULE: LNKVMALLO
    !           Call LNK$GETFIXSIZE to determine the size of the fixup ISD
    !           for based images.  This calculation was being done in-line
    !           and  was incomplete, leading to occaisional underestimates
    !           of the fixup ISD size.
    !


33) LTDRIVER (new image)

    ! LTDRIVER.EXE
    !
    !   ECO01   JAY0001         12-NOV-1984
    !           MODULE: LTDRIVER
    !           FIX PASSALL HANDLING.


34) MACRO32 (patch image)

    ! MACRO32.EXE
    !
    !
    !   ECO05   RRB0005         08-Oct-1984
    !           This patch resolves QAR #047 (FFT).
    !           Correctly parse global listing and object qualifiers
    !           only if this is the first input file of file list.
    !           Avoids naming output files after second, third... input
    !           file.  Also, correctly set the OFP bit in MAC$LIST_FAB
    !           rather than MAC$OBJECT_FAB in procedure GET_LISTING.
    !   
    !   ECO04   MGN0004         20-Sep-1984
    !           MODULE: ACTSTA
    !           This patch resolves SPR #11-62845.
    !           Fix problems with the use of the ASCII unary operator
    !           in an expression of an operand or .ADDRESS directive.
    !
    !   ECO03   RRB0003         11-sep-1984
    !           MODULE: ERROR
    !           This patch resolves Baselevel QAR #0111.
    !           Correctly signal an error finding a library
    !           specification.  Signal the error with the proper
    !           level of indirection.
    !
    !   ECO02   MGN0002         11-sep-1984
    !           MODULE: ACTSTA
    !           This patch resolves SPR #11-67895.
    !           Do not allow local labels as symbols in the .ENTRY
    !           directive.
    !
    !   ECO01   MGN0001         01-sep-1984
    !           MODULE: MACDEF
    !           This patch resolves SPR #11-63941.
    !           If the arguments in a macro definition form a line
    !           more than 140 characters long, the MACRO assembler
    !           returns an internal logic error.
    !           The fix consists of making sure there is enough space
    !           in the buffer where the arguments are stored to include
    !           the link flag and the link address for the next buffer.


35) MAIL (patch image)

    ! MAIL.EXE
    !
    !   ECO 3   ROP0041                         29-OCT-1984
    !           Close temporary file at end of inbound server
    !           loop.
    !   
    !   ECO 2   ROP0037                         04-OCT-1984
    !           Upon the request for information on the current message
    !           return a null descriptor if the TO field of the current
    !           message is not genuine.
    !   
    !   ECO 1   ROP0036                         04-OCT-1984
    !           Make sure new wastebasket names do not exceed MFR_S_FILEKEY
    !           characters in length.
    !           Modify only info record if set wastebasket is to the current
    !           wastebasket name.
    !   
    !
    !


36) MSCP (patch image)

    ! MSCP.EXE          
    !
    !   ECO01   EMB0114         19-Sep-1984
    !           MODULE: MSCP
    !           Clear the write protected bits on an available command.


37) MTAAACP (patch image)

    !
    !MTAAACP.EXE
    !
    !   ECO01   MMD0336                         8-November-1984
    !           MODULE:MAIL
    !           Fix for a race condition between dismount and reply/abort
    !           where if the dismount is issued before the reply/abort
    !           is finsihed the system could crash. The problem is that 
    !           the reply/abort does not set the VCB cancel I/O inprogress
    !           bit. Thus dismount will clear the databases out from under
    !           the cancel.
    !
    !           MMD0334                         8-NOVEMBER-1984
    !           MODULE:IODONE
    !           Change copy of local FIB to users buffer to copy
    !           only the magtape length of the FIB.
    !


38) NCP (patch image)

    ! NCP.EXE
    !
    !   ECO01   TRC0001         09-Nov-1984
    !           MODULE: NCPNETIO
    !           Fix Access Violation when CLEAR KNOWN LINES ALL done on RSX
    !           systems.


39) NETACP (patch image)

    ! NETACP.EXE
    !
    !   ECO03   PRB0003          2-NOV-1984 15:19 
    !           MODULE: NETDLLTRN.MAR
    !           Fix state table to cycle line if the start sequence gets
    !           out of sequence (get a verify message ahead of a start
    !           message for some reason).
    !
    !   ECO02   PRB0002          2-NOV-1984 14:22 
    !           MODULE: NETACPTRN.MAR
    !           Test for SS$_DEVNOTMNT as well as SS$_NOSUCHDEV on failures
    !           to connect to PSI. This accommodates the case where PSI was
    !           previously running but which has since been shut down.
    !
    !   ECO01   PRB0001         18-SEP-1984 21:35 
    !           MODULE: NETCONECT.MAR
    !           Use EPID, not IPID, in type 1 NCBs. This way, EPID will
    !           appear in SYS$NET.


40) NETCONFIG (edit text file)

    ! NETCONFIG.COM
    !
    !   ECO01   PRB0001          2-NOV-1984 14:42 
    !           MODULE: SYS$MANAGER:NETCONFIG.COM
    !           Fix bug which prevented configuration of nodes with
    !           addresses 1.1, 2.2, 3.3, 4.4, etc.


41) NODRIVER (patch image)

    !
    !NODRIVER.EXE
    !
    !   ECO02   MMD0332                         27-September-1984
    !           Fix to the NODRIVERs' SENSEMODEFDT routine to fix a 
    !           clrw off a location with no register. Fix to GETNXT
    !           to fix an instruction which was using the wrong
    !           register. Delete the instruction in SHUTDOWN_lINE 
    !           which clears the drivers nounload flag. 
    !
    !           MMD0333                         5-November-1984
    !           Module:DDCMP
    !           Fix to reset the DDCMP counters in DDCMP$STARTINT before
    !           any transmit requests are queued.


42) OPCOM (patch image)

    ! OPCOM.EXE
    !
    !   ECO01   JRL0040         1-Nov-1984
    !           Module: SECURITY
    !           Re-establish temporarily tied-off AUTHORIZE field auditing


43) PASRTL (miscellaneous fix)

    !
    !  PASRTL.EXE
    !
    !  Provide new .OBJ for PAS$OPEN2, to place in STARLET.
    !


44) PASRTL (patch image)

    ! PASRTL.EXE
    !
    !   ECO01   SBL             19-Dec-1984
    !           Module: PAS$OPEN2 (1-017)
    !           Check for "file-oriented-device" when a USER_ACTION
    !           routine is specified, as well as when it is not.  This
    !           fixes the problem where RESET does not reposition the file
    !           to the beginning if USER_ACTION was used.
    !


45) PUDRIVER (patch image)

    ! PUDRIVER.EXE
    !
    !   ECO01   EMB0117          7-NOV-1984
    !           MODULE: PUDRIVER
    !           Define two new devices.
    !
    ! Define basic driver offset


46) RMS (patch image)

    !
    ! RMS.EXE
    !
    !   ECO01   JEJ0056         01-Oct-1984
    !           MODULE: NT0DISCON, NT0DAPIO
    !           Correct error recovery code to properly construct and
    !           send the CONTINUE error recovery messages.
    !
    !   ECO02   JEJ0059         08-Oct-1984
    !           MODULE: RM0CACHE
    !           Correct a small timing window which can allow a stream
    !           hang if both multistreaming and deferred writeback are
    !           in use.
    !
    !   ECO03   JEJ0057         18-Oct-1984
    !           MODULE: NT0SEARCH
    !           Correct the handling of errors during a wildcard search
    !           so that non-fatal errors, such as RMS$_PRV, do not result
    !           in a hung transfer.
    !
    !   ECO04   JEJ0060         18-Oct-1984
    !           MODULE: RM1GETINT
    !           Correct the EOD check logic to use the remote device
    !           characteristics for a DAP-accessed file to determine if
    !           the input stream should be checked for an end of program
    !           input state.  This is to allow remote command procedures
    !           to work correctly.
    !
    !   ECO05   JEJ0062         18-Oct-1984
    !           MODULE: RM0DUMMY
    !           Set the RMS version number to V4.1.
    !
    !   ECO06   JEJ0061         22-Oct-1984
    !           MODULE: RM0ACCESS
    !           Force GET access to terminals and network files if DCL
    !           requests EXE access.  This is to allow SET VERIFY with
    !           @TT: to work together.
    !
    !   ECO07   DGB0090         30-Oct-1984
    !           MODULE: RM0XPFN
    !           Only skip translating sys$disk if the file name has BOTH
    !           a directory and a device name.  Otherwise, if sys$disk is
    !           a search list which includes a dir spec, we will lose
    !           it.
    !
    !   ECO08   JEJ0063         09-Nov-1984
    !           MODULE: RM0EXTRMS
    !           When echoing SYS$INPUT to SYS$OUTPUT (for SET VERIFY=IMAGE),
    !           declare the echo AST in the normal process permanent file
    !           mode, which is supervisor, instead of in user mode.  This is
    !           to correct the problem with echoing DEBUG commands.
    !
    !   ECO09   JWT0201         07-Dec-1984
    !           MODULE: RMS0RENAM
    !           Change error returned when attempting to $RENAME a
    !           nonexistent file.  V4.0 $RENAME returned ACC, this
    !           patch corrects the code to FNF.
    !
    !   ECO10   JEJ0064         27-Dec-1984
    !           MODULE: RM2CONN
    !           Correct the error in RM$CONNECT2 which caused an RMS bugcheck
    !           if a relative file were opened for block or record I/O and
    !           connected for both.  This is a restriction and will now
    !           correctly return an error when this is attempted.
    !


47) RTPAD (patch image)

    ! RTPAD.EXE 
    !
    !   ECO01   JLV0001         12-Nov-1984
    !           MODULE: CTSENSERT
    !           Fix offset problem in setting up parse of READ CHAR
    !           message.  Remove increment of error count intended
    !           for CTDRIVER only.
    !


48) SDA (patch image)

    ! SDA.EXE
    !
    !   ECO03   MSH0088          6-NOV-1984
    !           MODULE: PROCESS
    !           Restore current process context at a critical point in
    !           processing the SHOW SUMMARY/IMAGE command. This prevents
    !           incorrect stack displays in case the user issues a SHOW
    !           STACK command before SHOW SUMMARY/IMAGE is completed.
    !
    !   ECO02   EMB0115          6-NOV-1984
    !           MODULE: CLUSTER
    !           Fix a misdirected branch which causes the SDA image to
    !           exit if an invalid address is specified on the SHOW
    !           RSPID/CONNECTION=address command.
    !
    !   ECO01   JJO0001         18-SEP-1984
    !           MODULE: HANDLER
    !           Avoid extraneous redisplay of error messages by setting
    !           the "inhibit message display" bit for all conditions in
    !           the signal array passed to HANDLER.
    !
    !           MODULE: COMMANDS
    !           Use SDA error messages rather than generic (SHR) ones
    !           on file open failures. Clean up if ^C is typed while
    !           reading a (.STB) file.
    !
    !           MODULE: MAIN
    !           Avoid RMS-F-CCR error when execution of an indirect
    !           (command) file requires a page break (by not prompting
    !           in this case). Cleanly abort execution of an indirect
    !           file when ^C is typed by signalling EOF.


49) SDLNPARSE (new image)

    ! SDLNPARSE.EXE
    !
    !   ECO01   KDM0001         10-OCT-1984
    !           Provide image left off MicroVMS PROG kit.
    !


50) SECURESHR (patch image)

    ! SECURESHR.EXE
    !
    !   ECO01   LMP0310         5-Nov-1984
    !           MODULE: SYSACLSRV
    !           Change $CHANGE_ACL so that privs are not required to read a
    !           null ACL of an unowned device.  Also, allow BYPASS to change
    !           the ACL of an unowned device (in addition to SYSPRV).


51) SET (patch image)

    !SET.EXE
    !
    !   ECO02   MMD0337         1-Jan-1984
    !           MODULE: SWITCH_TERMINAL
    !           Delete code which changes the DDT address in the DDB
    !
    !   ECO01   AEW0006         07-Nov-1984
    !           MODULE: SETFILE
    !           This change enables the /NOEXPIRATION_DATE qualifier for
    !           SET FILE.  It enables any expiration date on a file to be
    !           negated, leaving no expiration date specified.
    !


52) SETP0 (patch image)

    !SETP0.EXE
    !
    !   ECO01   AEW0002         09-Nov-1984
    !           MODULES: SETP0MESS
    !                    SETP0DISP
    !           This patch eliminates the double error messages recieved when
    !           an error is encountered in SET PASSWORD.  This is the result of
    !           a change to SET MESSAGE enabling the reporting of error messages
    !           so the code patched here is in the SETP0 DISPATCH module and
    !           the SET MESSAGE module.


53) SHOW (patch image)

    ! SHOW.EXE
    !
    !   ECO01   PLL     07-Nov-1984
    !   Module:  SHOWTERM
    !   Fix to eliminate an access violation when 
    !   SHOW TERMINAL is dealing with a terminal
    !   defined in TERMTABLE (ie. a non-DEC terminal).
    !
    ! addr of module SHOWTERM


54) SMBSRVSHR (patch image)

    ! SMBSRVSHR.EXE
    ! Print Symbiont is a sharable image.
    !
    !   ECO0002 MODULE:FORMAT 
    !           RRB0002                 30 Oct 1984
    !           Correctly position output to the first printable line of
    !           the paper for FTN and PRN carriage control type files.
    !           
    !   ECO0001 MODULE:FORMAT (PSM$MAIN_FORMAT)
    !           MODULE:DISPATCH (CARRIAGE_CONTROL)
    !           RRB0001                 30 Oct 1984
    !           Correctly translate NEWLINE into carriage return-line feed
    !           pair.  Fixes output of PRN and FTN type files to correctly
    !           print on terminal executor queues.


55) SMGRTL (miscellaneous fix)

    !
    !  SMGSHR.EXE
    !
    !


56) SMGSHR (new image)

    ! SMGSHR.EXE
    !
    !   2-019   PLL             5-Nov-1984
    !           Module: SMG$INPUT
    !           In SMG$READ_STRING, don't use ESCAPE as the
    !           default modifier if the terminal is set to
    !           PASTHRU and NOESCAPE.
    !           Also, SMG$CREATE_VIRTUAL_KEYBOARD should not try
    !           to set the keypad mode for a VT173, since it
    !           had no keypad.
    !
    !   1-018   PLL             21-Oct-1984
    !           Module: SMG$MIN
    !           Fix an internal routine, SMG$$OUTPUT_MINIMAL_UPDATE,
    !           to perform QIOs at the end of a line, rather than
    !           fragmenting the line into many small QIOs.
    !
    !   1-016   STAN            21-Oct-1984
    !           Module: SMG$$MINIMUM_UPDATE
    !           Stop an internal routine, SMG$$PUT_SCREEN,
    !           from outputting the terminal sequence to return to
    !           normal video rendition after each character.  Also,
    !           it now outputs the normal sequence only when some other 
    !           rendition was previously in effect.
    !
    !   1-013   PLL             10-Oct-1984
    !           Module: SMG$$PUT_TEXT_TO_BUFFER
    !           A fix to this internal routine prevents an access
    !           violation which was occuring when a bell character
    !           was written to a virtual display.
    !
    !   1-073   PLL             14-Oct-1984
    !           Module: SMG$DISPLAY_OUTPUT
    !           SMG$CONTROL_MODE now will correctly validate the bits
    !           passed to it.  Previously it did not allow some valid
    !           combinations.
    !
    !   1-097   PLL             10-Oct-1984
    !           Module: SMG$DISPLAY_LINKS
    !           SMG$RESTORE_PHYSICAL_SCREEN now leaves the scrolling
    !           region as the entire physical screen, rather than in
    !           some random place.  This causes subsequent programs to
    !           appear correctly on the screen.
    !


57) STABACKUP (patch image)

    ! STABACKUP.EXE
    !
    !   ECO04   LY004             4-OCT-1984 15:43
    !           MODULE  : LIST, MAIN
    !           ROUTINE : FIN_LIST, MAIN
    !           Reset file and block counter after listing each save set
    !           Add "End of BACKUP operation" message.
    !           Print "End of..." message after a save or copy operation
    !           not just after listing an already existing journal or
    !           save set.
    !           ************** CAUTION **************************
    !           The unused byte named COM_PADDING in the common area
    !           is being used in this patch for a flag.  It is at address
    !           0000185C .
    !           ************** CAUTION **************************
    !
    !   ECO03   LY003            2-OCT-1984 12:57
    !           MODULE  : LIST, COMMAND
    !           ROUTINE : INIT_LIST, CHECK
    !           If listing a copy operation then say
    !           "Listing of BACKUP operation" instead of
    !           "Listing of save set"
    !
    !   ECO02   LY002            1-OCT-1984 10:36
    !           MODULE:  STAACP
    !           ROUTINE: READY_DISK
    !           Always issue an IO$_AVAILABLE before requesting a new
    !           disk be mounted.  This avoids the endless loop on RX50's
    !           if an error is detected on a disk.
    !
    !   ECO01   LY001            1-OCT-1984 09:07
    !           MODULE: SAVE
    !           Update version number to V4.1
    !


58) SYS (patch image)

    ! SYS.EXE
    !
    !  ECO03    ACG0469         21-Sep-1984
    !           MODULE: SYSDASSGN
    !           When waiting for pending I/O to finish on a channel
    !           being deassigned, reverify the channel on each check.
    !           Failing to do so could result in the channel being
    !           deassigned twice, resulting in a negative reference
    !           count on the device.
    !
    !  ECO04    TCM0001         27-Sep-1984
    !           MODULE: MEMORYALC
    !           When pool expansion fails, if we're still in INIT, don't
    !           broadcast a message to the console terminal (this causes an
    !           access violation since the opa0 data structures have not been
    !           initialized yet).
    !
    !  ECO05    EMB65497        29-Oct-1984
    !           MODULE: SYSASCEFC
    !           This patch resolves SPR 11-65497.
    !           Save the contents of R4 before the call to allocate
    !           a common event block.  This call will destroy the contents
    !           of R4 if a wait occurred.  Restore R4 to its previous
    !           value after the call.
    !
    !  ECO06    Bundled updates
    !
    !           LMP0314         6-Nov-1984
    !           MODULE: IPCONTROL
    !           Fix a bug which caused console interrupts to be disabled when
    !           issuing the second (or succeeding) prompt.  Also, fix a bug
    !           in which the stack was cleaned up before restoring the saved
    !           console status (from the stack).
    !
    !           LMP0312         5-Nov-1984
    !           MODULE: SYSCRMPSC
    !           This patch insures that the BYPASS privilege can be used when
    !           doing the protection check to validate access to the section.
    !
    !           SSA0032         7-Nov-1984
    !           MODULE: ACCOUNT
    !           MODULE: SYSRUNDWN
    !           These patches fix a bug that inhibited the writing of image
    !           accounting records for images INSTALLed with /ACCOUNTING.
    !
    !           JLV0001         12-Nov-1984
    !           MODULE: SYSBRKTHR
    !           Fix missing check for OPER privilege. Fix exit
    !           path to handle this case.
    !
    !  ECO07    HWS001          27-NOV-1984
    !           MODULE: INIT, SYSCOMMON
    !           Set version to X4.1
    !
    !  ECO08    RLRXDELTA               30-Nov-1984
    !           This patch will appear in the 4.2 update
    !
    !  ECO  9   LJKxxxx
    !           Bundle three unrelated patches, all of which fix problems
    !           that will cause the system to crash.
    !
    !   9 a     LJK4001         3-Dec-1984
    !           Module:         SYSDEVALC
    !           Traverse I/O data base in a way that is protected from
    !           dynamic UCB deletion.
    !
    !   9 b     LJK4002         4-Dec-1984
    !           Modules:        SYSDELPRC, SYSRUNDWN
    !           Only call the privileged rundown vectors once when a process
    !           is being deleted. This prevents a call in kernel mode to code
    !           that no longer exists.
    !
    !   9 c     LJK4003         5-Dec-1984
    !           Module:         PDAT
    !           Prevent automatic working set adjustment on the null
    !           process by setting the DISAWS bit in PCB$L_STS in the
    !           PCB of the null process.
    !
    !  ECO10    HWS002          05-JAN-1985
    !           MODULE: INIT, SYSCOMMON
    !           Set version to V4.1


59) SYSGEN (patch image)

    ! SYSGEN.EXE
    !
    !  ECO01    WHM0001         30-Oct-1984
    !           MODULES: LOADER and SYSBOOCMD
    !           Fix extraneous Vector in use message when booting from QVSS.
    !           Fix SHOW/HEX ascii-parameter accvio.
    !
    !


60) SYSLOA730 (patch image)

    ! SYSLOA730.EXE
    !
    !  ECO01    TCM0001         08-Oct-1984
    !           MODULE: INIADP730
    !           Fix calibration of EXE$GL_TENUSEC cell, which is used in
    !           timing loops (and the TIMEDWAIT macro).
    !
    !


61) SYSLOA750 (patch image)

    ! SYSLOA750.EXE
    !
    !  ECO01    TCM0001         08-Oct-1984
    !           MODULE: ERRSUB750
    !           Turn the cache back on when booting a 750 (it was disabled
    !           during the memory test).
    !
    !  ECO02    TCM0002         08-Oct-1984
    !           MODULE: INIADP750
    !           Fix calibration of EXE$GL_TENUSEC cell, which is used in
    !           timing loops (and the TIMEDWAIT macro).
    !
    !
    !


62) SYSLOA780 (patch image)

    ! SYSLOA780.EXE
    !
    !  ECO01    TCM0001         08-Oct-1984
    !           MODULE: INIADP780
    !           Fix calibration of EXE$GL_TENUSEC cell, which is used in
    !           timing loops (and the TIMEDWAIT macro).
    !
    !


63) TSDRIVER (new image)

    ! TSDRIVER.EXE
    !
    !
    !   ECO1    MMD0331         29-Oct-1984
    !           Delete the check for powerfail in the TEST_NBA routine.
    !
    !   ECO2    MMD0331         29-Oct-1984
    !           Clear the number of bytes returned on a read block
    !           when a tape mark is encountered
    !


64) TTDRIVER (new image)

    ! TTDRIVER.EXE
    !
    !   ECO01   MIR0450
    !           Remove code added in V04-001 it is no longer necessary
    !           Fix problem with disconnect where disconnection could
    !           happen when a read completion was waiting on the queue,
    !           This required a fork queue length check.
    !           Make terminal driver return F6 and f10 when line editing
    !           is disabled.
    !


65) TUDRIVER (patch image)

    ! TUDRIVER.EXE
    !
    !   ECO01   ROW0419          6-NOV-1984
    !           MODULE: TUDRIVER
    !           Correct two bugs.  First, change write function end-of-tape 
    !           handling so that it does not depend upon the "EOT encountered" 
    !           sub-code:  this value does not have the properties required 
    !           for generation of SS$_ENDOFTAPE.  Second, fix missing G^ on 
    !           call to ERL$LOGMESSAGE after label LOG_ATTENTION_MESSAGE.


66) UETCLIG00 (patch image)

    ! UETCLIG00.EXE
    !
    !   ECO01   GAS0001         26-Oct-1984
    !           MODULE: UETCLIG00
    !           Work around the 250 character maximum for $PUTMSG output.
    !
    !   ECO02   GAS0002         19-Nov-1984
    !           MODULE: UETCLIG00
    !           Set extra priv (OPER) required by $BRKTHRU


67) VMSINSTAL (edit text file)

    ! VMSINSTAL.COM
    !
    !   ECO01   HWS0001         26-NOV-1984
    !           Fix GENERATE_SDL_DEFINITIONS to correctly check for the
    !           existance of SDLNPARSE.EXE.
    !           


68) VMSKITBLD (new file)

    ! VMSKITBLD.DAT
    !
    !   ECO01   KDM0001                 10-OCT-1984
    !           Add SDLNPARSE.EXE to PROG_I option for MicroVMS.
    !
    !   ECO02   DGB0093                 01-NOV-1984
    !           Add VMBUVAX1.COM and VMBUVAX1P.EXE.
    !


69) XDDRIVER (patch image)

    !
    !XDDRIVER.EXE
    !
    !   ECO01   RNG0001                         27-December-1984
    !           Module:XDDRIVER
    !           Fix problem with computing modulo value for calculating
    !           modulo arithmetic for use with trib vector.
    !   
    !


70) XGDRIVER (patch image)

    !
    !XGDRIVER.EXE
    !
    !   ECO01   MMD0329                         25-October-1984
    !           Module:XGDRIVER
    !           Fix to the com_xmitfdt routine, where the driver would
    !           crash the system if the line had not been started
    !           before transmits were started over the device.
    !   
    !
    !           MMD0333                         5-November-1984
    !           Module:DDCMP
    !           Fix to reset the DDCMP counters in DDCMP$STARTINT before
    !           any transmit requests are queued.
    !
    !   ECO2    MMD0329                         25-October-1984
    !           Fix to return buffer over flow when a received message
    !           is large for a buffer for LAPB mode. Fix the startup
    !           line FDT processing so that priviledge is only required
    !           to start up in BISYNC mode.
    !


71) YCDRIVER (new image)

    ! YCDRIVER.EXE
    !
    !
    !   ECO1    WHM0003         01-NOV-1984
    !           FIX TEST FOR DEVICE DMF32 VS DMZ32 IN CONTROLLER INIT ROUTINE
    !
    !   ECO2     MIR0001                Michael I. Rosenblum    09-Nov-1984
    !           Some DMF lookalike board don't
    !           Do Autoxon-xoff correctly.  Add code to disable the
    !           feature based on bit 0 of the sysgen parameter 
    !           TTY_DEFPORT.
    !
    !



 $ 

 $ 

 $ 

 $ 

 $ 

 $ 

 $ @sys$system:shutdown


        SHUTDOWN -- Perform an Orderly System Shutdown

How many minutes until final shutdown [0]: 
Reason for shutdown [Standalone]: 
Do you want to spin down the disk volumes [NO]? 
Do you want to invoke the site-specific shutdown procedure [YES]? 
Should an automatic system reboot be performed [NO]? 
When will the system be rebooted [later]: 

Shutdown options (enter as a comma-separated list):
 REBOOT_CHECK        Check existence of basic system files

Shutdown options [NONE]: 

%SHUTDOWN-I-OPERATOR, This terminal is now an operator's console.
%%%%%%%%%%%  OPCOM  22-JAN-1985 09:55:50.40  %%%%%%%%%%%
Operator status for operator _OPA0:
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10, OPER11,
OPER12
%SHUTDOWN-I-DISLOGINS, Interactive logins will now be disabled.
%SET-I-INTSET, login interactive limit = 0, current interactive value = 1
%SHUTDOWN-I-STOPQUEMAN, The queue manager will now be stopped.

SHUTDOWN message from user SYSTEM at _OPA0:   09:55:50
The system will shut down in 0 minutes; back up later.  Please log off.
Standalone

1 terminal has been notified.

%SHUTDOWN-I-SITESHUT, The site-specific shutdown procedure will now be invoked.
%SHUTDOWN-I-STOPUSER, All user processes will now be stopped.
%SHUTDOWN-I-REMOVE, All installed images will now be removed.
%SHUTDOWN-I-DISMOUNT, All volumes will now be dismounted.
%%%%%%%%%%%  OPCOM  22-JAN-1985 09:55:50.59  %%%%%%%%%%%
Message from user SYSTEM
_OPA0:, The system shutdown was requested by the operator.
%%%%%%%%%%%  OPCOM  22-JAN-1985 09:55:50.60  %%%%%%%%%%%
Logfile was closed by operator _OPA0:
Logfile was SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;3
%%%%%%%%%%%  OPCOM  22-JAN-1985 09:55:50.61  %%%%%%%%%%%
Operator _OPA0: has been disabled, username SYSTEM

  
	SYSTEM SHUTDOWN COMPLETE - USE CONSOLE TO HALT SYSTEM
  
Infinite loop, PC: 80008D7E (BRB 80008D7E)
sim> exit
Goodbye
Log file closed